Remove the spark plug
Click to get the mixture to the engine by repeatedly pressing the pump tank until the mixture does not come close to the carburetor. Pull the starter rope for about ten times to allow the engine to vaporize in the cylinder just the right amount of mixture. In case of starting with starter run the engine without accendicandela for a few seconds. Both methods are more effective if they stop the discharge of a finger to increase the pressure
The transaction will be completed when the spark plug hole will not leave the largest amount of mixture in the form of spray, but a jet vaporized.
Only then can you reinstall the plug.
Now you can heat the candle with the tool and start the engine.
WARNING: dell'accendicandela between the installation on the engine and starter have to pass a few seconds otherwise the candle will burn, pull the cord must be short and fast (for the length of the tube as an example that contains the thread of 'antenna).
Bring the starter rope all the way can cause the release of the return spring. Once on
leave the engine running at low speed with accendicandela inserted for a few seconds, then remove and check that the motor is running and functions at all speeds.
0 comments:
Post a Comment